Chương trình theo dõi màn hình máy tính
1 using System.Reflection;
2 using System.Runtime.CompilerServices;
3
4 //
5 // General Information about an assembly is controlled through the following
6 // set of attributes. Change these attribute values to modify the information
7 // associated with an assembly.
8 //
9 [assembly: AssemblyTitle("")]
10 [assembly: AssemblyDescription("")]
11 [assembly: AssemblyConfiguration("")]
12 [assembly: AssemblyCompany("")]
13 [assembly: AssemblyProduct("")]
14 [assembly: AssemblyCopyright("")]
15 [assembly: AssemblyTrademark("")]
16 [assembly: AssemblyCulture("")]
17
18 //
19 // Version information for an assembly consists of the following four values:
20 //
21 // Major Version
22 // Minor Version
23 // Build Number
24 // Revision
25 //
26 // You can specify all the values or you can default the Revision and Build Numbers
27 // by using the '*' as shown below:
28
29 [assembly: AssemblyVersion("1.0.*")]
30
31 //
32 // In order to sign your assembly you must specify a key to use. Refer to the
33 // Microsoft .NET Framework documentation for more information on assembly signing.
34 //
35 // Use the attributes below to control which key is used for signing.
36 //
37 // Notes:
38 // (*) If no key is specified, the assembly is not signed.
39 // (*) KeyName refers to a key that has been installed in the Crypto Service
40 // Provider (CSP) on your machine. KeyFile refers to a file which contains
41 // a key.
42 // (*) If the KeyFile and the KeyName values are both specified, the
43 // following processing occurs:
44 // (1) If the KeyName can be found in the CSP, that key is used.
45 // (2) If the KeyName does not exist and the KeyFile does exist, the key
46 // in the KeyFile is installed into the CSP and used.
47 // (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
48 // When specifying the KeyFile, the location of the KeyFile should be
49 // relative to the project output directory which is
50 // %Project Directory%\obj\<configuration>. For example, if your KeyFile is
51 // located in the project directory, you would specify the AssemblyKeyFile
52 // attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
53 // (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
54 // documentation for more information on this.
55 //
56 [assembly: AssemblyDelaySign(false)]
57 [assembly: AssemblyKeyFile("")]
58 [assembly: AssemblyKeyName("")]
2 using System.Runtime.CompilerServices;
3
4 //
5 // General Information about an assembly is controlled through the following
6 // set of attributes. Change these attribute values to modify the information
7 // associated with an assembly.
8 //
9 [assembly: AssemblyTitle("")]
10 [assembly: AssemblyDescription("")]
11 [assembly: AssemblyConfiguration("")]
12 [assembly: AssemblyCompany("")]
13 [assembly: AssemblyProduct("")]
14 [assembly: AssemblyCopyright("")]
15 [assembly: AssemblyTrademark("")]
16 [assembly: AssemblyCulture("")]
17
18 //
19 // Version information for an assembly consists of the following four values:
20 //
21 // Major Version
22 // Minor Version
23 // Build Number
24 // Revision
25 //
26 // You can specify all the values or you can default the Revision and Build Numbers
27 // by using the '*' as shown below:
28
29 [assembly: AssemblyVersion("1.0.*")]
30
31 //
32 // In order to sign your assembly you must specify a key to use. Refer to the
33 // Microsoft .NET Framework documentation for more information on assembly signing.
34 //
35 // Use the attributes below to control which key is used for signing.
36 //
37 // Notes:
38 // (*) If no key is specified, the assembly is not signed.
39 // (*) KeyName refers to a key that has been installed in the Crypto Service
40 // Provider (CSP) on your machine. KeyFile refers to a file which contains
41 // a key.
42 // (*) If the KeyFile and the KeyName values are both specified, the
43 // following processing occurs:
44 // (1) If the KeyName can be found in the CSP, that key is used.
45 // (2) If the KeyName does not exist and the KeyFile does exist, the key
46 // in the KeyFile is installed into the CSP and used.
47 // (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
48 // When specifying the KeyFile, the location of the KeyFile should be
49 // relative to the project output directory which is
50 // %Project Directory%\obj\<configuration>. For example, if your KeyFile is
51 // located in the project directory, you would specify the AssemblyKeyFile
52 // attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
53 // (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
54 // documentation for more information on this.
55 //
56 [assembly: AssemblyDelaySign(false)]
57 [assembly: AssemblyKeyFile("")]
58 [assembly: AssemblyKeyName("")]